# Design Repeats

![Design Repeats Icon](https://3801852105-files.gitbook.io/~/files/v0/b/gitbook-legacy-files/o/assets%2F-LvDkg_itZXfSAjm0jwH%2F-LxUP4YXRS2GMr6wvLGp%2F-LxUR1GcsnaMwesl81Jt%2Fimage.png?alt=media\&token=a6e3f950-7358-42b7-b118-9014838bcd1b)

Using the select and copy functions, areas of warp and weft can be selected and copied.   The Design Repeats provides options that can make copying faster.

### Quick Repeats Tab

Starting with a simple example,  the Quick Repeats tab allows a quick selection of all the Warp and/or Weft and allows a specified number of repeats.

![Quick Repeats of Warp and Weft](https://3801852105-files.gitbook.io/~/files/v0/b/gitbook-legacy-files/o/assets%2F-LvDkg_itZXfSAjm0jwH%2F-MHuup_qHPgd2QzXfCNq%2F-MHuvszXCl4fnVVDcF-7%2Fimage.png?alt=media\&token=b2cefb7c-834f-45b0-a5fb-0dea66b213de)

In the above example the Warp is to be repeated 4 times and will measure 3.75 inches (based on ends per inch/cm from Project Information | Planning | Setup).  Similarly you can see the length, calculated a 7 inches in the above example, based on 6 repeats and picks per inch/cm in the project setup.  Once Apply is clicked, the changes are reflected in the design.   

Tip: Ctrl-Z will undo the copy.

### Warp Repeat Tab

The second tab provides options for repeating warp. This option is also accessible from the [Warp icon on the Design menu.](https://docs.tempoweave.com/tempoweave/documentation-by-menu-function/design-tab/warp-group/warp-transformation-options) 

### Weft Repeat Tab

The weft repeat option can is documented here: [Weft Repeats](https://docs.tempoweave.com/tempoweave/documentation-by-menu-function/design-tab/weft-group/weft-repeats).