> For the complete documentation index, see [llms.txt](https://docs.tempoweave.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.tempoweave.com/tempoweave-course-library/working-with-profile-drafts-and-block-substitution/profile-drafts-and-block-substitution/manually-entering-a-profile-draft.md). # Manually Entering a Profile Draft A profile draft works under the same rules as a thread-by-thread draft. A profile draft has a number of shafts equal to the number of blocks, and blocks are entered through the threading. If there is a tie-up, then then the weft calls for a treadle, the corresponding number of shafts rise or sink, depending on if the project mode is set for rising or sinking shed. Profile drafts may also be entered as a liftplan; again, the rising/sinking shed determines if the color on the warp or weft shows on the surface. The following video shows manually entering a profile draft. {% embed url="" %}