> For the complete documentation index, see [llms.txt](https://docs.tempoweave.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.tempoweave.com/tempoweave-course-library/tips-and-tricks-for-using-tempoweave-studio/pinning-in-the-draft.md). # Pinning in the Draft Figure out where exactly where you are in your draft Zero in on an exact location easily by placing a Pin in the draft going vertically and/or horizontally so that you know the exact warp and weft number corresponding to the area of interest. {% embed url="" %} First be sure you have the select tool highlighted, then right click in either the warp or weft structure, or in the drawdown. Remove the "pin lines" by having the select tool activated and right clicking, or click on the pin "badge".