> For the complete documentation index, see [llms.txt](https://docs.tempoweave.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.tempoweave.com/tempotreadle-3/tempotreadle-2/setup-for-a-weaving-project-tempotreadle-2/checking-your-tie-up.md).

# Checking your Tie-Up

Project Setup | Tie-Up

The tie-up display is an information only screen that can be useful to double check that the tie-up as called for in the WIF has been done correctly.  The simple shaft number list per treadle is a good double-check to avoid errors in the cloth due to tie-up. Simply sit on your loom bench, press each treadle and looking at the tie-up screen verify that the correct shafts move.  You may have to use the scroll down arrow to see additional treadles. In the TempoTreadle screen picture below,  treadle 1 is tied to shafts 1 and 2;  treadle 2 to shafts 3 and 4, etc.

<figure><img src="https://content.gitbook.com/content/zlKFzCjhVc5c7ChmaNU4/blobs/2Sa7zgJLdcqvyYx8fvyz/image.png" alt=""><figcaption></figcaption></figure>