> For the complete documentation index, see [llms.txt](https://docs.tempoweave.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.tempoweave.com/help-by-menu-tabs/design-menu/repeat-by-quarters.md).

# Repeat by Quarters

### What It Does

Repeat by Quarters builds a larger tie-up (or liftplan block) from one small block. You draw the block once; TempoWeave copies it into the three quarters around it, and you choose how each copy is changed: turned, flipped, mirrored on a diagonal, or changed in face. The result is twice as wide and twice as tall as the block you started with.

It is the quickest way to build turned-twill and two-block tie-ups, pinwheels, kaleidoscope-style mirrors, and the symmetry designs used for tessellations.

***

### Why "Quarters"?

Designing a tie-up in quarters is a long weaving tradition. Many two-block and turned-twill tie-ups are drawn as a square cut into four: a twill block in two opposite corners and its turned or face-changed partner in the other two. Weavers have called these quarter (or quadrant) designs for generations, and TempoWeave keeps the name. It also goes further: the block can be any rectangle, and every quarter gets its own setting.

***

### Location

**Desktop**

* **Tie-up**: Design tab ▸ Tie-Up ▸ **Repeat by Quarters…**, or right-click a tie-up selection
* **Liftplan**: Design tab ▸ Weft menu ▸ **Repeat by Quarters…**, or right-click a liftplan selection

**Mobile**

* Design panel ▸ Tie-up section ▸ **Repeat by Quarters…** (in a liftplan draft it works on the selected picks)

***

### Choosing the Block

* **Tie-up**: select the block first. It can be any rectangle: 4 × 4, 6 × 6, 3 × 5. With nothing selected, TempoWeave uses the quarter of the tie-up at shaft 1, treadle 1.
* **Liftplan**: select the picks and shafts to repeat (on mobile, the selected picks across the first half of the shafts).

The copies go into the shafts, treadles and picks next to the block. If the result needs more shafts or treadles than the draft has, the dialog says so, and they are added when you apply. Picks past the end of a liftplan extend the draft.

***

### Setting Each Quarter

The dialog shows four cards laid out the way the quarters will sit on screen. The **Original** card is your block; the other three are the copies. For each copy, choose:

| Choice                     | What it does                                               |
| -------------------------- | ---------------------------------------------------------- |
| Copy as is                 | A plain copy                                               |
| Reverse                    | Flipped left to right                                      |
| Invert                     | Flipped top to bottom                                      |
| Turn 180°                  | Turned half way round (Reverse and Invert together)        |
| Turn 90° clockwise         | Turned a quarter clockwise                                 |
| Turn 90° counter-clockwise | Turned a quarter counter-clockwise                         |
| Flip on diagonal ⟋         | Mirrored across the diagonal from bottom left to top right |
| Flip on diagonal ⟍         | Mirrored across the diagonal from top left to bottom right |

Quarter turns and diagonal flips need a square block; they are grayed out for a rectangle.

Each quarter, including the original, also has a **Change Face** box, which swaps raised and lowered in that quarter.

Directions are as you see them on screen, whichever corner your draft puts shaft 1, treadle 1 or pick 1 in. "Reverse" always means left to right as you look at it.

The **Preview** beside the cards shows the finished block, with the quarter lines in red, and updates as you change any setting.

***

### Quick Sets

The Quick set buttons fill in all three copies at once. Start from one and then change a single quarter.

| Button      | Result                                                                                                 |
| ----------- | ------------------------------------------------------------------------------------------------------ |
| Copy        | Three plain copies                                                                                     |
| Turn 90°    | A pinwheel: going clockwise from the original, each quarter is turned a quarter more                   |
| Turn 180°   | The quarters beside and above the original are turned half way round; the diagonal one is a plain copy |
| Mirror ↔    | The other half is a left–right mirror image                                                            |
| Mirror ↕    | The other half is a top–bottom mirror image                                                            |
| Mirror both | Mirrored both ways, like a kaleidoscope                                                                |

***

### Example: a Turned Twill

1. Draw a 4-shaft twill line in the lower-left 4 × 4 of the tie-up and select it.
2. Open **Repeat by Quarters**, click **Turn 90°**.
3. Tick **Change Face** on the top-left and bottom-right quarters.
4. **Apply.** You have an 8 × 8 turned-twill tie-up for a two-block design: weave it with a two-block threading on 8 shafts.

***

### Tips

* **Undo** (Ctrl+Z / ⌘Z) takes the whole repeat back in one step.
* **Test the cloth**: the block is only as good as the cloth it weaves. Check long floats with Float Check after applying.
* **Larger blocks**: the block isn't limited to four shafts. Use six on a 12-shaft loom, or eight on 16 shafts.
* **Symmetry designs**: for tessellations and wallpaper-group designs, set each quarter by hand. The diagonal flips and per-quarter Change Face give you the combinations a spreadsheet would.
