> For the complete documentation index, see [llms.txt](https://docs.tempoweave.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.tempoweave.com/help-by-menu-tabs/design-menu/name-draft.md).

# Name Draft

*Available on Desktop with a Lite, Core, or Pro license.*

### Overview

Name Draft turns a name or a phrase into a 4-shaft overshot draft. Each letter is coded to a shaft, the coded letters become the threading, and TempoWeave adds a standard overshot tie-up and a tromp-as-writ treadling so the result weaves. A name draft is a traditional way to hide a person, a place, or a date in cloth: the words are there in the threading, but no one can read them off the fabric.

The draft updates live as you type and change options, so you can watch the pattern take shape and try several readings of the same words before you keep one.

`[Screenshot: Name Draft dialog with a phrase typed in and the drawdown behind it]`

***

### Opening Name Draft

**Design tab → Weave Explorer group → Name Draft.** The dialog opens over the current draft and works on that draft directly: whatever is in the tab is replaced by the name draft while the dialog is open. Close keeps the result, and Undo brings the previous draft back if you change your mind.

Start with a new draft, or a draft you are happy to replace, rather than a finished design.

***

### Step by step

1. Type a name, a word, or a phrase in **Name or phrase**. Spaces and punctuation are skipped; letters and digits become threads. The draft appears as soon as there is something to code.
2. Choose an **Encoding**. This is the rule that turns each letter into a shaft number. Try a few; the same words give quite different cloth.
3. Choose a **Tie-up**, Star or Rose, and an **Assembly**, which decides how the coded threading is laid out across the warp.
4. Leave **Keep it weavable** ticked unless you want the raw mapping.
5. Read the line under the options. It tells you how many threads the draft has and how many incidental threads were added.
6. Press **Close** to keep the draft. The whole thing is one undo step.

***

### The options

#### Encoding

There is no single correct way to code letters to shafts. Any mapping is valid as long as the cloth weaves, so TempoWeave offers four, and each gives a different draft from the same text.

| Encoding     | How letters are coded                                                                                                                                                                                             |
| ------------ | ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
| **Alphabet** | a, e, i, m, q, u go on shaft 1; b, f, j, n, r, v on shaft 2; c, g, k, o, s, w on shaft 3; d, h, l, p, t, x on shaft 4; y and z start over on 1 and 2. This is the common "AEIMQU" scheme found in guild handouts. |
| **Reverse**  | The Alphabet scheme flipped: a = 4, b = 3, c = 2, d = 1, then e = 4 again.                                                                                                                                        |
| **Zigzag**   | Letters walk a point-twill motion, 1, 2, 3, 4, 3, 2, by their position in the alphabet. Adjacent letters land on adjacent shafts, so this encoding makes the fewest long floats.                                  |
| **Random**   | A fresh letter-to-shaft table, drawn at random. Press the **🎲 Regenerate** button beside the list for another table. Each table gives a new draft from the same words.                                           |

Digits 0 to 9 are coded by value in every encoding: 0 goes on shaft 1, 1 on shaft 2, 2 on 3, 3 on 4, and 4 starts over on shaft 1. Upper and lower case are the same.

#### Tie-up

Both are the standard 4-shaft overshot tie-ups with four pattern treadles and two tabby treadles:

* **Star** ties the pattern treadles to shafts 1-2, 2-3, 3-4 and 4-1, the common overshot tie-up that gives the star fashion.
* **Rose** ties them 1-4, 1-2, 2-3, 3-4, which turns the blocks and gives the rose fashion of the same threading.

Treadles 5 and 6 are the tabbies, shafts 1-3 and 2-4.

#### Assembly

The coded letters make one repeat. Assembly decides how many times it appears and which way it faces:

* **One repeat (profile draft)**: the coded threading once. Use this when you want to take the name into **Block Substitution** as a profile draft, or when the words are long.
* **Repeat + Repeat**: the threading twice, the same way round.
* **Repeat + Reverse (symmetrical)**: the threading followed by its mirror image, with the turning thread used once, which gives a palindrome that reads the same from either selvedge. Most woven name drafts use this.
* **Reverse + Reverse**: the same palindrome started from the other end, the mirror image first and the threading after it.

#### Keep it weavable

Overshot needs odd and even shafts to alternate thread by thread; two neighbouring threads on shafts of the same parity, say 1 and 3, make a float. With this box ticked, TempoWeave inserts an incidental thread of the opposite parity wherever two coded letters would sit on the same parity, the classic move weavers make by hand when drafting a name. The status line counts how many were added.

Untick it to see the raw letter-to-shaft mapping. The draft may then have long floats, so run **Float Check** before you weave it.

***

### What you get

A 4-shaft draft with six treadles: four pattern treadles and two tabbies. The treadling is tromp as writ, so the cloth repeats the threading in the weft, and it carries pattern picks only. To weave it as overshot, add the tabby picks with **Tools → Add Tabby**, and set the pattern weft to a heavier yarn than the tabby.

The dialog works on the draft in the current window and replaces its threading, tie-up and treadling. Warp and weft colors are left for you to set afterward.

***

### Tips

* **Short words make clear blocks.** A first name or a single word gives a draft you can read as blocks; a whole sentence gives a long, busy repeat. Use **One repeat** for long text.
* **Compare encodings on the same word.** Type the word once, then step through Alphabet, Reverse and Zigzag. The drawdown updates each time, so you can pick the one you like without retyping.
* **Random is a design well, not a lottery.** Press Regenerate until a pleasing arrangement appears. The seed is kept while the dialog is open, so a draft you like stays put until you regenerate again.
* **Use it as a profile.** One repeat with Keep it weavable ticked is a tidy four-block profile. Open **Block Substitution** and substitute a unit weave to turn the name into summer and winter, crackle or another block weave.
* **It undoes as one step.** If the dialog closed on something you did not want, Undo returns the draft you had before you opened it.

***

### Related

* **Block Substitution**: turn a one-repeat name draft into any block weave.
* **Add Tabby**: insert the tabby picks an overshot treadling needs.
* **Float Check**: find floats longer than you want before weaving.
* **Common Weave Structures**: the standard 4-shaft overshot drafts the tie-ups here come from.
